Oil Refinery

Refinery device - Filtration of carbonized substance

• 1. Reduced costs through quality control of refined edible oil
• 2. Up to 70% reduction in edible oil
• 3. Quality control of edible oil through discoloration, deodorization and deoxidation
• 4. Controlled generation of polar compounds through the elimination of polymerized substances

Characteristics of the product

• 1. Maintenance of the best frying taste
• 2. Improved quality of frying based on ionization
• 3. Installation of a filter in a shop

How to use

• 1. How to refine
• - Cool down the temperature of oil to be refined to lower than 100 degrees
     (If the oil temperature is higher than 100 degrees, it causes problems to the machinery.
     Make sure to check the temperature and start refining if the temperature is lower than 100 degrees.)
• - Install a one-touch coupling hose to the connector indicated as IN (Pour oil to be refined through
     the use of a filter on the opposite side of the hose. If there is a filter, it is recommended to implement
     refining after filtering)
• - Install a one-touch coupling hose to the connecter indicated as OUT (Put the end of the hose
     in an oil container.
• - Turn on REFINE Switch to start refining. (Refining takes 1.5 hours or longer based on 10 liters.
     Make sure to appropriately install the hose before refining.)
• - Turn off REFINE Switch after completed refining. (Do not leave oil in the hose and completely
     discharge it. Separate IN and OUT hoses to hang them in an appropriate place.)



• 2. How to use edible oil and fat after refining
• - Keep refined edible oil and fat in a separate container.
• - Pour refined edible oil and fat into a frying container and supply the same amount of new oil
  for frying (About 20% reduced at a time of refining for the first time)



• 3. How to use Long Magic
• - Fix the generation plate at the bottom of a frying tank (an empty tank).
     (At that time, make sure not to attach materials out of which metal current might flow)
• - Connect the generation plate to a connector. (Put it into oil to be refined by using a filter
     on the opposite side of the hose. If there is a filter, it is recommended to implement refining after filtering.)
• - If the installation is complete, pour edible oil into the frying tank.
  
• * The oil tank board becomes hot as oil is heated. Do not touch it during and after using.
• - Turn on Long Magic Switch to control oxidation.
• - Turn off Long Magic Switch after completed frying. (Do not leave oil in the hose and completely
     discharge it. Separate IN and OUT hoses to hang them in an appropriate place.)
• - If there are foreign substances on the surface of the generation plate, clean it by using clean cloth.
     (If there are too much foreign substances on the surface, it might not fully function,
     so make sure to keep it clean.)
  
• * Make sure to turn it off at a time of cleaning and repairing.
• - Although the quality of edible oil and fat is good enough through the use of
     an oxidation controller (Long Magic), make sure to resupply needed oil for frying.

top